ETP Bushes

Product Details:

We are offering ETP Keyless Bushings to our clients.

Features:

• These products replace keys and keyways, for connection of a shaft to a hub. Keyway transmission increases the cost due to various operations involved including downtime, machining time, lateral shifting of key-ways in the process, etc.
• There are ETP keyless locking device models designed to solve specific requirements such as high transmittable torque and special applications.
• They are the best solution where keyways and tapers can weaken due to excessive usage or when high torque and a good runout are required.
• ETP Classic and Express models are also available in stainless steel for corrosion protection.

Specifications:

Product Details:

ETP-Classic is available as standard for shafts, also imperial and a short version, (type S). Also available in stainless steel ( type R). The small number of clamping screws with low tightening torque, makes the mounting/ dismantling procedure fast and easy

Construction:

• ETP-Classic is a hydraulic connection which consists of a double-walled hardened steel sleeve, filled with a specially developed pressure medium, sealing ring, piston, pressure flange and cap head clamping screws. ETP-Classic type R is made of stainless steel and has hex head stainless steel clamping screws. This in order to facilitate easy cleaning, essential within food processing.

Operation: 

• When tightening the screws, the sleeve expands uniformly against hub and shaft and creates a rigid joint. When loosening the screws, the sleeve returns to its original measurements and can easily be dismantled. ETP-Classic type R has a few more clamping screws, as the tightening torque is lower for stainless steel screws.

Advantages:

• Easy and accurate positioning
• Short lengths and outside diameters - making them compact
• Quick mounting
• Good run out (both axial and radial)
• Speedy assembly/Dismantling
• Mounting and dismantling is fast
• Service and maintenance are also quick

Benefits and Features:

• Small built-in dimensions
• Mounting and dismantling is fast
• Fine adjustment of the hub can be made during mounting
• Low tightening torque and a small number of screws makes the mounting easy
• Good concentricity, also after several mountings
• Hex head screws available as accessories.

Product Details:

We are offering Locking Assembly to our clients. An exhaustive range of models (ID/OD retained the same, for standardization, in most models) to suit varied widths of products being mounted with Lower run-out characteristics (self-centering and nonself-centering). MAV Special products are also designed and manufactured to suit individual customer requirements.

Product Details:

We are offering ETP Keyless Bushings to our clients.

Features:

• These products replace keys and keyways, for connection of a shaft to a hub. Keyway transmission increases the cost due to various operations involved including downtime, machining time, lateral shifting of key-ways in the process, etc.
• There are ETP keyless locking device models designed to solve specific requirements such as high transmittable torque and special applications.
• They are the best solution where keyways and tapers can weaken due to excessive usage or when high torque and a good runout are required.
• ETP Classic and Express models are also available in stainless steel for corrosion protection.

Specifications:

Product Details:

We are offering ETP Keyless Bushings to our clients.

Features:

• These products replace keys and keyways, for connection of a shaft to a hub. Keyway transmission increases the cost due to various operations involved including downtime, machining time, lateral shifting of key-ways in the process, etc.

• There are ETP keyless locking device models designed to solve specific requirements such as high transmittable torque and special applications.

• They are the best solution where keyways and tapers can weaken due to excessive usage or when high torque and a good runout are required.

 

ETP bushes consists of a thin walled cylinder filled by a 'medium'. When this medium is pressurised, they tend to expand the thin walled cylinders and grip both the shaft and the component at the same time, WITHOUT THE NEED OF troublesome KEYS AND KEYWAYS.

 

Mounting of an ETP Bush

To mount any product onto a shaft – Position the ETP Bush on the shaft/product, & just tighten the screw. This tightening increases the pressure on the medium which expands the inner/outer walls of the Bush to grip the shaft and the component simultaneously.

The original - a competitive connection for all normal needs! ETP-CLASSIC is used in a large variety of applications, and positioning along and around the shaft is easy and fast. ETP-CLASSIC is also available in stainless, type R, suitable for the food and medical industries.  

 

The original - a competitive connection for all normal needs!

ETP-CLASSIC is used in a large variety of applications, for mounting timing belt pulleys, cam curves and arms etc.
Positioning along and around the shaft is easy and fast with high precision. Service and maintenance are also quick because of the easy dismantling.
ETP-CLASSIC is recommended for all normal needs.

ETP-CLASSIC is also available in stainless, type R, suitable for the food and medical industries.

Construction
ETP-CLASSIC is a hydraulic connection which consists of a double-walled hardened steel sleeve, filled with a specially developed pressure medium, sealing ring, piston, pressure flange and cap head clamping screws.
ETP-CLASSIC type R is made of stainless steel and has hex head stainless steel clamping screws. This in order to facilitate easy cleaning, essential within food processing.

Operation
When tightening the screws, the sleeve expands uniformly against hub and shaft and creates a rigid joint. When loosening the screws, the sleeve returns to its original measurements and can easily be dismantled.
ETP-CLASSIC type R has a few more clamping screws, as the tightening torque is lower for stainless steel screws.

Benefits & Features 

Small built-in dimensions.

Mounting and dismantling is fast.

Fine adjustment of the hub can be made during mounting.

Low tightening torque and a small number of screws makes the mounting easy.

Good concentricity, also after several mountings.

 

Hex head screws available as accessories.

Product Details:

We are offering Locking Assembly to our clients. An exhaustive range of models (ID/OD retained the same, for standardization, in most models) to suit varied widths of products being mounted with Lower run-out characteristics (self-centering and nonself-centering). MAV Special products are also designed and manufactured to suit individual customer requirements.

Product Details:

We are offering ETP Keyless Bushings to our clients.

Features:

• These products replace keys and keyways, for connection of a shaft to a hub. Keyway transmission increases the cost due to various operations involved including downtime, machining time, lateral shifting of key-ways in the process, etc.

• There are ETP keyless locking device models designed to solve specific requirements such as high transmittable torque and special applications.

• They are the best solution where keyways and tapers can weaken due to excessive usage or when high torque and a good runout are required.

 

ETP bushes consists of a thin walled cylinder filled by a 'medium'. When this medium is pressurised, they tend to expand the thin walled cylinders and grip both the shaft and the component at the same time, WITHOUT THE NEED OF troublesome KEYS AND KEYWAYS.

 

Mounting of an ETP Bush

To mount any product onto a shaft – Position the ETP Bush on the shaft/product, & just tighten the screw. This tightening increases the pressure on the medium which expands the inner/outer walls of the Bush to grip the shaft and the component simultaneously.

For fast mounting and compact design! ETP-EXPRESS is a hydraulic connection which has only ONE screw for pressurising. It is especially suitable for repositioning of the hub fast and accurately. The screw is tightened in the radial direction, this means no space is used along the shaft for mounting tools. ETP-EXPRESS is also available in stainless, type R, suitable for the food and medical industries!  

 

ETP-EXPRESS is a hydraulic connection which has only ONE screw for pressurising.

It is especially suitable for repositioning of the hub fast and accurately. The screw is tightened in the radial direction, this means no space is used along the shaft for mounting

tools. Other components can be mounted on the shaft all the way up to the flange. ETP-EXPRESS has extremely small built-in dimensions which makes a compact design possible.

 

Construction

ETP-EXPRESS is a hydraulic connection which consists of a double-walled hardened steel sleeve filled with a pressure medium and a flange.

The flange part contains screw and piston with seals to maintain pressure.

 

Operation

When the pressure screw is tightened, the double-walled sleeve expands uniformly against shaft and hub and creates a rigid joint.

Dismantling is done by loosening the screw. ETP-EXPRESS returns to its original dimensions and can easily be dismantled.

 

Benefits & Features

Extremely fast mounting/dismantling with only ONE screw.

Radial tightening of the screw saves space along the shaft.

Extremely small built-in dimensions.

Accurate positioning, no axial movement when mounting.

 

Good concentricity, also after several mountings.

Product Details:

We are offering ETP Keyless Bushings to our clients.

Features:

• These products replace keys and keyways, for connection of a shaft to a hub. Keyway transmission increases the cost due to various operations involved including downtime, machining time, lateral shifting of key-ways in the process, etc.

• There are ETP keyless locking device models designed to solve specific requirements such as high transmittable torque and special applications.

• They are the best solution where keyways and tapers can weaken due to excessive usage or when high torque and a good runout are required.

 

ETP bushes consists of a thin walled cylinder filled by a 'medium'. When this medium is pressurised, they tend to expand the thin walled cylinders and grip both the shaft and the component at the same time, WITHOUT THE NEED OF troublesome KEYS AND KEYWAYS.

 

Mounting of an ETP Bush

To mount any product onto a shaft – Position the ETP Bush on the shaft/product, & just tighten the screw. This tightening increases the pressure on the medium which expands the inner/outer walls of the Bush to grip the shaft and the component simultaneously.

High precision and frequent mounting! ETP-TECHNO is a hydraulic connection with very high precision. It is especially designed for applications where fast frequent changes or adjustments, with high precision are needed. It can be mounted/dismantled 1000´s of times.  

 

ETP-TECHNO is a hydraulic connection with very high precision.

It is especially designed for applications where fast frequent changes or adjustments, with high precision are needed. It can be mounted/dismantled 1000´s of times

ETP-TECHNO is very easy to mount with only one screw, and it also has extremely good concentricity and is the one to choose among the ETP hub-shaft connections when very high precision is needed.

Construction
ETP-TECHNO is a hydraulic connection which consists of a double-walled hardened steel sleeve filled with a pressure medium, and a flange.
The flange contains the pressure screw and piston with dual sealing function
- an o-ring plus backup ring and a steel ball.

Operation
When the pressure screw is tightened, the double-walled sleeve expands uniformly against the shaft and the hub and creates a rigid joint.
Dismantling of the joint is simply done by loosening the screw. ETP-TECHNO returns to its original measurements and can easily be dismantled.

Benefits & Features 

Extremely fast mounting/dismantling with only ONE screw.

Can be mounted/dismantled 1000´s of times.

Extremely good concentricity, ≤ 0.006 mm, also after several mountings.

Dual sealing system.

Radial tightening of the screw saves space along the shaft.

 

Accurate positioning, no axial movement when mounting.

Product Details:

We are offering ETP Keyless Bushings to our clients.

Features:

• These products replace keys and keyways, for connection of a shaft to a hub. Keyway transmission increases the cost due to various operations involved including downtime, machining time, lateral shifting of key-ways in the process, etc.

• There are ETP keyless locking device models designed to solve specific requirements such as high transmittable torque and special applications.

• They are the best solution where keyways and tapers can weaken due to excessive usage or when high torque and a good runout are required.

 

ETP bushes consists of a thin walled cylinder filled by a 'medium'. When this medium is pressurised, they tend to expand the thin walled cylinders and grip both the shaft and the component at the same time, WITHOUT THE NEED OF troublesome KEYS AND KEYWAYS.

 

Mounting of an ETP Bush

To mount any product onto a shaft – Position the ETP Bush on the shaft/product, & just tighten the screw. This tightening increases the pressure on the medium which expands the inner/outer walls of the Bush to grip the shaft and the component simultaneously.

Fast mounting and high radial loads! With ETP-POWER all the positive benefits and features of hydraulic clamping is combined with high radial load capacity due to the specific properties of the pressure medium.  

 

Fast mounting and high radial loads

ETP-POWER is a hydraulic connection with the highest performance among the single screw ETP hub-shaft connections.
With ETP-POWER all the positive benefits and features of hydraulic clamping, such as easy handling, compact design and precision,
is combined with high radial load capacity due to the specific properties of the pressure medium.

Construction
ETP-POWER is a hydraulic connection which consists of a double-walled hardened steel sleeve filled with a specially developed pressure medium and a flange.
The flange part contains screw and piston with seals to maintain pressure. In the flange there are two pre-machined bores which can be used for mounting location pins,
screws to the hub or similar.

Operation
When the pressure screw is tightened the double-walled sleeve expands uniformly against shaft and hub and creates a rigid joint. Dismantling is done by loosening the screw.
ETP-POWER returns to its original dimensions and can easily be dismantled.

 

Benefits & Features 

High radial load capacity.

Fast mounting/dismantling with only ONE screw.

Small built-in dimensions.

Radial tightening of the screw saves space along the shaft.

Accurate positioning, no axial movement when mounting.

 

Good concentricity, also after several mountings.

Product Details:

We are offering ETP Keyless Bushings to our clients.

Features:

• These products replace keys and keyways, for connection of a shaft to a hub. Keyway transmission increases the cost due to various operations involved including downtime, machining time, lateral shifting of key-ways in the process, etc.

• There are ETP keyless locking device models designed to solve specific requirements such as high transmittable torque and special applications.

• They are the best solution where keyways and tapers can weaken due to excessive usage or when high torque and a good runout are required.

 

ETP bushes consists of a thin walled cylinder filled by a 'medium'. When this medium is pressurised, they tend to expand the thin walled cylinders and grip both the shaft and the component at the same time, WITHOUT THE NEED OF troublesome KEYS AND KEYWAYS.

 

Mounting of an ETP Bush

To mount any product onto a shaft – Position the ETP Bush on the shaft/product, & just tighten the screw. This tightening increases the pressure on the medium which expands the inner/outer walls of the Bush to grip the shaft and the component simultaneously.

For heavy loads and quick mounting! ETP-HYLOC is a hydro- mechanical hub-shaft connection which, due to its robust design, is ideally suited to work in difficult environments and heavy operations like steel rolling mills, process industries etc. Mounting and dismantling is easily carried out with a hydraulic pump!  

 

For heavy loads and quick mounting!

ETP-HYLOC is a hydro-mechanical hub-shaft connection which, due to its robust design, is ideally suited to work in difficult environments
and heavy operations like steel rolling mills, process industries etc. An interesting application, among many, has been fastening of feeding or forming rolls to shafts.

ETP-HYLOC is fast to mount, has good concentricity and can take high torque and radial loads. Mounting and dismantling is easily carried out with a hydraulic pump.

Construction
ETP-HYLOC is a hydro-mechanical joint, which consists of a double-walled steel sleeve which encloses a conical moveable piston. Mounting and dismantling is carried out with a hydraulic pump.
In the flange there are three threaded connections (”ON”, ”P” and ”OFF”) in the radial direction and the same in the axial.
This makes it possible to choose radial or axial connection of the pump hoses, depending on the build-in situation.

Operation
When the piston is moved, by the hydraulic pressure from the pump, the double-walled sleeve expands uniformly against shaft and hub to form a rigid joint.
When dismantling, the piston is moved in the opposite direction and the joint will loosen. A small amount of oil will be taken via spiral tracks in the piston
between the surfaces (pressure applied through the ”P” connection), in this way making it easier for the piston to move.
Normal working pressure is 1 000 bar.

Benefits & Features 

High transmittable torque capacity - can be varied by changing the mounting pressure.

Fast mounting/dismantling in tight spaces.

High radial load capacity.

Radial and axial connection is possible.

Fine adjustments of the hub can be made when mounting.

 

Good concentricity, also after several mountings.